Firing and pressing. In a kiln.
Pressed ceramics require precision.
More possibilities for your lab—with precise temperature control and controlled pressing processes.
With pressable ceramics, temperature, pressing pressure, and cooling must work together reliably. The VARIO PRESS 330 combines firing and pressing processes in a single system, creating a versatile solution for your daily lab routine.
When firing dental ceramics, every phase of the process counts. Uniform temperature distribution, controlled cooling, and efficient workflows lay the foundation for reproducible results.
VARIO PRESS 330
For Your Pressed Ceramics
The VARIO PRESS 330 supports you in working with pressable ceramics and lithium disilicate, as well as in other ceramic applications.
Your options:
- Pressed ceramics
- Lithium disilicate
- Customized Ceramics
- Veneers
- Glazing
- Staining
- Crystallization
Avoid corrections
→ No cracks or bubbles in the ceramic
→ Reproducible results of the highest quality
Be efficient
→ Save time with extremely short pressing cycle times—about 50% shorter than the standard pressing process
→ Fast, intuitive, and error-free operation
→ Save on energy costs
Advanced Press Process
The Advanced Press System ensures a particularly uniform temperature distribution during the pressing process. This creates consistent conditions for your press.
Dynamic Pressing Pressure
The fully automatic press pressure control takes into account factors such as object volume, flow rate, and compressed air supply, and adjusts the pressing process accordingly.
Controlled Cooling
TTC mode enables linear, uniform cooling, thereby supporting a controlled process.
Many processes. One system.
In addition to pressing processes, you can use the VARIO PRESS 330 for a variety of other ceramic applications—including firing, glazing, dyeing, and crystallization.
Technical Specifications
VARIO PRESS 330 Pressing and Firing Kiln
| Dimensions (L x W x H) | 320 x 765 x 445 mm |
| Weight | 28 kg |
| Power | 1,300 W |
| Voltage | 120 / 230 V, 50/60 Hz |
| Heating Rates | 1–200 °C/min |
| Control Sensor | Type R |
| Number of heating elements | Resistance heating in quartz glass |
| 5+1 freely programmable heating ramps (temperature, heating rate, hold time) | – |
| Recovery Program | – |
| Vacuum | Yes |
| Compressed air | Yes |
| 120 mm combustion chamber for uniform temperature distribution across the entire operating range | – |
| Ø 100 mm, height 80 mm, press chamber with uniform temperature (three-legged support surface) | Yes |
| Advanced Press Process | yes |
| Linear cooling at a rate of 5°C/min – 45°C/min in TTC mode | Yes |
| Controlled drying with the optimal lift position in Z-Drying mode | Yes |
Still not sure which kiln is right for you?
Whether it’s ceramic firing, pressing, or zirconia—we’ll work with you to assess your applications, materials, and requirements.