Ceramic Firing. Precise. Safe. Reproducible.
So you can rely on your firing results—even with challenging ceramic work.
When firing dental ceramics, every phase of the process counts. Uniform temperature distribution, controlled cooling, and efficient procedures lay the foundation for reproducible results. So your creative and unique work leads to the best possible final result!
VARIO 230
For Your Ceramic Work
The VARIO 230 is the ideal solution if you want to fire veneering ceramics with precision and reproducibility while prioritizing quality and efficient processes.
Suitable for:
- Veneering ceramics
- Customized ceramic restorations
- sophisticated aesthetic work
- Firing processes on various framework materials
Save yourself the hassle of corrections
→ No cracks or bubbles in the ceramic
→ No chipping from the Zr or CoCr framework
→ Strengthen your customers’ trust
Be efficient
→ Save time: Fast, intuitive, and error-free operation
→ Start the next firing cycle faster
→ Save on energy costs
Uniform Temperature Distribution
Consistent temperatures create optimal conditions for your ceramics. The design of the firing chamber promotes uniform temperature distribution across the entire kiln shelf.
Controlled cooling with TTC
Not only heating, but also cooling is crucial. The TTC mode enables controlled, linear cooling according to your specifications.
Save Time with Z-Drying
Use the existing kiln temperature directly for pre-drying. This allows you to start subsequent processes sooner and reduce unnecessary wait times.
Reproducible Firing Processes
Controlled temperature regulation ensures stable conditions for consistent firing results.
Technical Specifications
VARIO 230 Kiln
| Dimensions (L x W x H) | 320 x 550 x 480 mm |
| Weight | 25 kg |
| Power | 1,250 W |
| Voltage | 120 / 230 V, 50/60 Hz |
| Heating Rates | 1–200 °C/min |
| Control Sensor | Type R |
| Number of heating elements | Resistance heating in quartz glass |
| 5+1 freely programmable heating ramps (temperature, heating rate, hold time) | – |
| Recovery Program | – |
| Vacuum | Yes |
| Compressed Air | – |
| 120 mm combustion chamber for uniform temperature distribution across the entire operating range | Yes |
| Ø 100 mm, height 80 mm, press chamber with uniform temperature (three-legged support surface) | – |
| Advanced Press Process | – |
| Linear cooling at a rate of 5°C/min – 45°C/min in TTC mode | Yes |
| Controlled drying with the optimal lift position in Z-Drying mode | Yes |
Still not sure which kiln is right for you?
Whether it’s ceramic firing, pressing, or zirconia—we’ll work with you to assess your applications, materials, and requirements.